Prefabricated House,Flat Pack Container House,Expandable Container House
Low Voltage 4.6kV-33kV Steel Utility Pole Core Specifications
- tags：

utility steel pole

4.6-33kV Steel Utility Pole: Core Specifications

Definition: Hot-dip galvanized steel structures engineered for medium-voltage distribution lines, transformer mounting, and rural/urban power networks.

Parameter Specification Standard/Grade
Voltage Class 4.6kV / 11kV / 22kV / 33kV IEC 60038
Height Range 9–18m Modular sections
Material ASTM A572 Gr.50 / S355JR Yield: 345-355 MPa
Coating Hot-Dip Galvanizing (HDG) Min. 610g/m² (ISO 1461)
Top Diameter 100-180mm Taper: 1.2%/m
Base Diameter 220-450mm  
Wind Resistance 160 km/h (IEC 60826 Class 4) 12.5mm radial ice load
Bending Moment 20-150 kN·m At GL (ground line)

Structural Design Features

1. Sectional Configuration

  • Tapered Monopole: Conical design for optimal load distribution

  • Joint Types:

    1. Flange-bolted (M24 bolts, 8.8 grade)

    2. Slip-fit with shear pins (for rapid assembly)

  • Standard Heights:

     
  • graph LR  
33kV --> 15m/18m  
22kV --> 12m/15m  
11kV --> 9m/12m

2. Insulator & Hardware Mounting

Component Specification
Crossarms Hot-dip galvanized steel (1.5-3m length)
Insulator Pins 16-24mm Ø, spaced per phase clearance
Phase Spacing 11kV: 0.9m / 33kV: 1.8m (IEC 61936)
Ground Clearance ≥5.5m for 33kV (AS/NZS 7000)

3. Foundation Systems

33kv utility steel pole

Electrical Safety Systems

Component Function Standard
Neutral Conductor Top-mounted (ABC systems) / Crossarm-mounted IEC 60502-2
Grounding 50mm² Cu cable to 2×3m rods (≤10Ω) IEEE 80
Surge Arresters Polymer-housed (30kA, 36kV MCOV) IEC 60099-4
Warning Signs "DANGER 33kV" at 2.5m height ISO 3864

Performance Comparison

Feature Steel (33kV) Concrete (33kV) Wood (33kV)
Lifespan 50+ years 40 years 20 years
Failure Mode Bend deformation Brittle fracture Rot at base
Ice Load Capacity 25mm radial 20mm radial 15mm radial
Maintenance Zero Crack inspection Pest control
Recyclability 100% Limited Low

Corrosion Protection System

33kv utility pole

Typical Configurations

11kV Distribution Pole

text
 
Height: 12m  
Crossarms: 2×2.4m (horizontal V-configuration)  
Conductors: AAC 150mm² (3-phase + neutral)  
Ground Clearance: 5.0m

33kV Sub-Transmission Pole

text
 
Height: 18m  
Crossarms: 3×3.0m (delta formation)  
Conductors: ACSR 240/40mm²  
Ground Clearance: 6.5m

Installation Protocol

  1. Site Survey:

    1. Soil resistivity testing (Wenner 4-pin method)

    2. Overhead line scan (LiDAR clearance check)

  2. Erection:

    1. Crane lift with spreader bars

    2. Verticality tolerance: ≤1:500

  3. Commissioning:

    1. Insulator cleaning (silicone coating)

    2. Torque check: 90% yield strength of bolts

    3. Megger test: >500 MΩ (phase-to-ground)

Cost Analysis

18m 33kV Pole Cost (USD)
Pole + Hardware $1,800–2,500
Foundation $600–1,200
Installation $1,000–1,500
Total $3,400–5,200
Note: 40% lower lifecycle cost vs. concrete over 30 years

Case Study: Desert Deployment

Project: Saudi Arabia 132/33kV Substation Feeder

utility steel pole

Compliance & Certification

Engineering Tip: For 33kV lines, specify corona rings on insulators where altitude >1000m to reduce RF noise.

For custom designs: Provide soil class, wind/ice zone, and conductor tension for pole class selection (Class 1 to Class 5 per IEC 60826).

 Learn more at   www.alttower.com

 

 

Contact Us

keyboard_arrow_up